$30,000
Hamel, Minnesota
Category
-
Length
-
Posted Over 1 Month
• Rear wheel drive • Front wheel drive • 4WD/AWD cars, recreational vehicles (with selectable single axle drive) • 2WD/4WD race cars • Sport utility vehicles • Light commercial vehicles • Motorcycles (with optional adapter) Transmission Types • Front wheel drive • Rear wheel drive • All wheel drive • Locked Front:Rear AWD • Full time AWD • Viscous coupled AWD • Intelligent european AWD (Volvo dog clutch) • Variable ratio Front:rear Vehicle / axle weights Maximum vehicle weight 4,500 kg (9,900 lb) Maximum axle weight (per axle) 2,250 kg (4,450 lb) Vehicle wheelbase (Alternative wheelbase dimensions available on request. Refer factory) Minimum wheelbase 2,250 mm (89") Maximum wheelbase 3, 500 mm (138") Power, Tractive Effort, Torque and Speed (Note 3) Front Axle Maximum power graphing 1,350 kW (1,800 HP) Max. tractive effort graphing 41,400 N (9,300 lb) Max. roller torque graphing 4,500 Nm (3,300 ft lb) Max. axle torque graphing (Note 1) 12,300 Nm (9,000 ft lb) Max. engine torque graphing (Note 2) 4,200 Nm (3,000 ft lb) Max. power steady speed 900 kW (1,200 HP) Max. tractive effort steady speed 27,600 N (6,200 lb) Max. roller torque steady speed 3,000 Nm (2,200 ft lb) Max. axle torque steady speed (Note 1) 8,200 Nm (6,000 ft lb) Max. engine torque steady speed (Note 2) 2,800 Nm (2,000 ft lb) Max road speed 200 km/h (120 MPH) - 250 km/h (150MPH)* Rear Axle Maximum power graphing 1,350 kW (1,800 HP) Max. tractive effort graphing 41,400 N (9,300 lb) Max. roller torque graphing 4,500 Nm (3,300 ft lb) Max. axle torque graphing (Note 1) 12,300 Nm (9,000 ft lb) Max. engine torque graphing (Note 2) 4,200 Nm (3,000 ft lb) Max. power steady speed 900 kW (1,200 HP) Max. tractive effort steady speed 27,600 N (6,200 lb) Max. roller torque steady speed 3,000 Nm (2,200 ft lb) Max. axle torque steady speed (Note 1) 8,200 Nm (6,000 ft lb) Max. engine torque steady speed (Note 2) 2,800 Nm (2,000 ft lb) Max road speed 200 km/h (120 MPH) - 250 km/h (150MPH)* Both Axles Maximum power graphing 1,800 kW (2,400 HP) Max. tractive effort graphing 61,300 N (13,800 lb) Max. roller torque graphing 6,500 Nm (4,800 ft lb) Max. axle torque graphing (Note 1) 18,200 Nm (13,400 ft lb) Max. engine torque graphing (Note 2) 6,200 Nm (4,600 ft lb Max. power steady speed 1,800 kW (2,400 HP) Max. tractive effort steady speed 55,200 N 12,400 lb) Max. roller torque steady speed 6,000 Nm (4,400 ft lb) Max. axle torque steady speed (Note 1) 16,400 Nm (12,000 ft lb) Max. engine torque steady speed (Note 2) 5,600 Nm (4,000 ft lb Max road speed 200 km/h (120 MPH) - 250 km/h (150MPH)* Roller Chassis Retardation and Loading Retarder/PAU type Magnetic eddy current retarder/PAU - Aux retarder/PAU Load/speed availability High load available at all speeds Cooling fins per retarder/PAU 84 Rollers Drive roller traction surface High grip Dyno Dynamics unique square cut knurl Front & rear rollers linked No (fully independent). Roller Diameter 217 mm (8.5") drive rollers Roller length 855 mm (33") Track Maximum (Note 4). 2180 mm (86") Track Minimum (Note 5). 465 mm (18") Roller rotation Bi-directional Wheelbase adjustment Remote adjustment From command module Wheelbase lock Self locking Electronic Adjustment Front:Rear Front wheel control Manual front wheel stabilisers Adjustable manual front wheel stabilisers Wheel position indicators 2 x wheel contact indicators on command module Exit Brake Electromagnetic roller exit brake Bearings 14 Balance Rollers and flywheel dynamically balanced Traction Roller surface Dyno Dynamics unique square cut knurl Low tyre temperature operation Heavy duty traction control system* Tie down points per bed 8 Traction control mount points 4 Axle download User adjustable (with straps or optional airbag) Inertias (Per axle) Roller inertia and retarder (combined) 3.566 kgm2 (84.6 lbft2) Bed equivalent inertia (typical) 302 kg (665 lb) Installation and Dimensions Refer installation drawings for detailed dimensions Length extended 4,400 mm (173") Width 3,390 mm (133.5") Roller surface above ground Above ground In pit 390 mm (15") 40 mm (1.5") Retarder cover above ground 550 mm (22") 150 mm (6") Dyno Dynamics DS control system Loading & Balancing 4WD/AWD Smart system for correct (safe) loading under all conditions. Instrumentation Computer Custom turn-key computer system Monitor* Country dependent - refer factory Additional monitors* Additional monitors and remote displays available - refer factory Command Module TouchScreen PDA Cabinet* Range of heavy duty steel cabinets available - refer factory Automatic fan control* On-Off-Auto. Controls 2 fans. Cool-down timer Power loss calculator Calculates engine power / torque from wheel power Measurement and Display Power display resolution 0.1 kW (0.1 HP) Tractive effort display resolution 10 N (1.0 lb) Force measurement Precision electronic shear beam load cell Interface Vac pressure boost* Inlet air temperature High speed Air:Fuel ratio/Lambda* Thermo-couple inputs* Auxiliary inputs* Fan control Tachometer Multiple inputs (refer to tachometer documentation) Atmospheric Correction Screen Inlet air temperature Ambient temperature Barometric pressure Relative humidity Mechanical efficiency (Dyno Dynamics ATMC2 only) Resultant correction factor Bar Screen Date, time Used to date and time stamp reports Customer name 35 characters Test details "Poor economy, low power "etc. Vehicle identification Vehicle registration, license, race number etc RPM:Road speed ratio Derived from ignition system, vehicle ECU, roller speed, injector, optical pick-up* Power Analogue bar & digit: kW (HP) [0.1 kW (0.1 HP) resolution] Tractive Effort Analogue bar & digit. N (lb) [1 N ( 0.1 lb) resolution] Speed Analogue bar & digit. km/h (MPH) [0.1 km/h (0.1 MPH) resolution] Inlet air temperature Degrees C (F) [0.1 resolution] Fuel mixture* Petrol (gasoline), LPG (propane), alcohol, diesel Air:Fuel ratio and Lambda [0.1 AFR/0.01 Lambda resolution] Manifold vacuum/boost* Metric and imperial units. Gauge & absolute reference Engine RPM Ignition, ECU, roller, optical pick-up* Engine torque Nm (ft lb) Range of user definable inputs Temp, volts, pressure drops, TPS, etc Graph screen Road power kW (HP) Road tractive effort N (lb) Road speed km/h (MPH) Run distance km/h (mile) Engine power kW (HP) Engine torque Nm (ft. lb) Engine speed RPM Fuel mixture* Petrol (gasoline), LPG (propane), alcohol, diesel Air:Fuel ratio and lambda Vacuum / boost* Metric and imperial units. Atmospheric & absolute reference Time Seconds User defined inputs Up to 4 Coast-down correction Based on coast-down test Drive-train loss Based on coast-down test, ShootOut specification loss Auto Graph SnapShot Triggers SnapShots at user defined road speed or engine speed interval Large Digits on graph screen Air:Fuel ratio Air:Fuel ratio or Lambda Vacuum / boost* Metric and imperial units. Atmospheric & absolute reference RPM Derived from ignition system, ECU, roller speed, optical pick-up* Graph Types Full screen: Diagnostic and performance graphs High resolution Step ramp (user definable step) Step graph Snap graph SnapShot Screen Data acquisition of values defined by user User definable recording Work performed Work history Test Modes Constant speed mode Dial in the desired speed Constant load mode Dial in the desired load Ramp mode Ramp Up-Hold-Down. Dial in the desired acceleration Cooling fans Range of cooling fans depending on country of installation Cooling fan control* Software Software: independent control of two fans (or other devices): On-Off-Auto Programmable cool-down timers Command Module Manual fan control over-ride Electrical Supply - (Varies with country and region of installation, refer factory) Australia Dynamometer: 415V 50 Hz Fans: 240 - 250 V single phase / 415V three phase Europe Dynamometer: 380 - 415 Volt three phase 50 Hz USA Fixed installation 220 -250V two phase 60 Hz Shipping weights and dimensions (Approximate) Dynamometer chassis crated - Crate 1 1,215 kg 1,380 mm x 910 mm x 3,130 mm 2,675 lb 54.3" x 36" x 123" Crate 2 1,215 kg 1,380 mm x 910 mm x 3,130 mm 2,675 lb 54.3" x 36" x 123" AWD/4WD cabinet and control system 285 kg 790 mm x 880 mm x 1900 mm 630 lb 31" x 34.6" x 74.8" Small cabinet and control system (computer monitor not included) 200 kg 790 mm x 880 mm x 1400 mm 440 lb 31" x 34.6" x 55" * Denotes Optional Note 1: Assumes 600 mm (23.5") tyre diameter Note 2: Assumes max torque occurs @ 3,500 RPM Note 3: Assumes sufficient traction Note 4: Distance between outer roller ends Note 5: Distance between inner roller ends Due to Dyno Dynamics commitment to ongoing research and development, specifications may change without notice.
