Hyundai rvs for sale in West Columbia, South Carolina

2015 Hyundai Hy-Cube 53' Air-Ride Dry Van

$24,000

West Columbia, South Carolina

HYUNDAI Specifications 2015 286001-286150 GVWR GVWR: Trailer to meet 68,000# GVWR VIN Plate: US VIN Plate to read in English (standard) *Product Type: HT Hy Cube GEOMETRY LENGTH – EXTERIOR: 53’ LENGTH – INTERIOR: 52’6” nominal lining to lining WIDTH – EXTERIOR: 102.36” WIDTH – INTERIOR: 101” Nominal lining to lining HEIGHT – EXTERIOR: 13’6” HEIGHT – INTERIOR: 110” Nominal DECK HEIGHT: Standard Application FIFTH WHEEL HEIGHT: 47” KINGPIN LOCATION: 36” LANDING GEAR LOCATION: 107” from King Pin (+1”/-0”) TIRES & WHEELS TIRE FURNISHED: Factory furnished *TIRE MANUFACTURER: Hankook TL01 (G), low rolling resistance tire TIRE SIZE: 295/75R 22.5 WHEEL FURNISH: Factory Furnished WHEEL MATERIAL: All Steel wheel WHEEL MANUFACTURER: HT Standard (TCC 361) WHEEL SIZE: 22.5 x 8.25 – 5-Hand Hole (Steel, Inner & Outer) WHEEL FINISH FOR STEEL: Powder Coated White Steel Disc WHEEL FINISH FOR ALUMINUM: None (Due to All Steel Wheel Application) VALVE STEM & CAP: Valve Stem & Metal Dome Cap UPPER COUPLER APPROACH PLATE: 1/4” Thick 80,000lb Yield – 6 Support Channels KING PIN PLATE (BTM MAIN): 1/4” Thick 80,000 lb. Yield KING PIN & MANUFACTURER: Standard (Jost) AAR Cruciform King Pin *FRONT BOTTOM RAIL: Stainless Steel, w/pick-up plate & Striker Angle UPPER COUPLER TUBE QTY: (1) Tubing Application - Joggled BODY/BASE FORWARD CROSSMEMBERS: Steel Hat shaped Upper Coupler to Landing Gear; 12” C/L LANDING GEAR C/M: 4” Steel I-Beams, 80,000# PSI, 12” C/L (5ea) BAY AREA X MEMBERS: 4” Steel I-Beams, 80,000# PSI, 12” C/L RUNNING GEAR C/M: 4” Steel I-Beams; 80,000# PSI, 12” C/L w/8” C/L last 3.4’ RUNNING GEAR C/M SIZE: 4” high SLIDER/BODY RAIL (VT): 208” Rail Length FLOOR UPPER COUPLER TYPE: 3.40” Joggled w/Exposed Coupler Top Plate. FLOOR SPECIFICATION: 1-3/8” Nominal Domestic Laminated Oak Hardwood FLOOR ASSEMBLY METHOD: Wood floor assembly FLOOR SCREWS: (3) .31” Diameter Screws per Board on I beams THRESHOLD FINISH: Hot dip galvanized THRESHOLD PLATE: 0.13” x 12” deep Steel Diamond Plate w/Screws & Nuts. THRESHOLD APPLICATION: Standard Application FRONT *FRONT CORNER RADIUS: 4” Aluminum Cover Sheet. FRONT PANEL & COLOR-DRY: 0.05” Aluminum pre-painted white w/natural color rivets. *FRONT CORNER MAT’L-DRY: 0.05” Aluminum pre-painted white. FRONT POSTS: (4) 2.5” Deep (16ga) Steel Hats Welded to Upper Coupler - Non AAR. GLADHANDS: Phillips Quick-E w/filters. Control Line only, overlaid. FRONT RECEPTACLE (7-WAY): Phillips 7-Way without Circuit Breakers, Split Pins with QCS plug FRONT RECEPTACLE (7 WAY) OPTIONS: QCS plug connector GLANDHAND/7-WAY LOCATION: Overlaid on Lower Roadside Front *CORNER RADIUS PROTECTOR: (2) 0.125” x 12” aluminum Diamond Plate each side at top. SIDE *SIDE MATERIAL: 0.05” Aluminum pre-painted White w/natural color rivets. *SIDE POSTS: 0.45” Deep 14-Gauge Galvanized Steel “A” Slotted Logistic Posts *SIDE POST CENTERS: 16” C/L w/12” C/L at Upper Coupler & Support Gear *SIDE TOP RAIL: Shallow Post Side Top Rail *SIDE BOTTOM RAIL: Side Bottom Rail Fasteners to Bottom Rail: Standard Rivets to attach C/Members to the Side Bottom Rail. REAR REAR FRAME: Swing door, 2” shallow header (with 1 lock rod per LH & RH door) REAR DOOR OPENING SPEC: Standard application FLOOR LEVEL: Door to be flush with floor (STD) DOOR TYPE for DRY VAN SW: .5” Xxentria composite swing door. Galvanized Prepainted white interior & exterior skin *OPTION – DOOR (MAIN LINE): Install standard anti-theft hardware OPTION-DOOR INSTALL INSTRUCT: Standard door installation per Manufacturer’s recommendation OPTION – DOOR & HARDWARE: One (1) rubber door bumper on hinge of each swing door HINGES: Four (4) aluminum hinges per door *ADDITIONAL HINGE OPTION: Additional One (1) Aluminum Hinge (Total 5/door) REAR UNDERRIDE GUARD: 4” Tube, bolt on assembly w/welded perforated (pooched) horizontal OPTION-HORIZONTAL MEMBER/OTHER: Construction of two pieces standard stitch welding UNDERRIDE BOLT SPEC: Zinc plated bolts & nuts - Standard DOCK BUMPERS: Pair 2” x 4” Mold Bolted Bumper RUBBER BUMPER LOCATION: Inboard of Light Protector Bars (standard) ROOF ROOF PANEL: 0.040” Aluminum ROOF BOW: 16-Gauge Galvanized Steel Anti-Snag ROOF BOW CENTERS: 24” Centers Full Length LINING/SCUFF *SIDE LINING: 0.235” HDPE Recycled Plastic installed between posts FRONT LINING: 0.25” Top & 0.5” Bottom plywood mounted to front posts full height *SIDE SCUFF: 0.63” x 12” high White recycled plastic mounted directly to post *FRONT SCUFF: 0.63” X 12” High White Recycled Plastic Mounted Over Lining to Front Posts (Overlaid) CORNER FINISH/TREATMENT: Standard Application LANDING GEAR LANDING GEAR SPEC: Jost HT421.G3.157 5 Year Warranty Full HDG LANDING GEAR MOUNTING METHOD: Inboard Mounting (Standard) *LANDING GEAR SHOES: 10” x 10” Low Profile Cushion Foot LANDING GEAR GROUND CLEARANCE: Nominal 12” Ground Clearance LANDING GEAR MOUNTING BRACKET: Hot Dip Galvanized large Wing Plate CRANK HANDLE: Roadside L/GEAR OPTIONS: None (HT STD) LANDING GEAR BRACE DESIGN: HT standard cross brace attachment design RUNNING GEAR BOGIE TYPE: Sliding Tandem (2) Axle Bogie AXLE SPACING: 49” AXLE ABS SYSTEM: Tandem axle w/2S/1M ABS System BOGIE & AXLE LOCATION: Location to be sliding tandem axle for specified slider length w/ stop bars @ front & rear SUSPENSION MANUFACTURER: Hendrickson SUSPENSION CAPACITY: Standard Duty SUSPENSION SPECIFICATION: Hendrickson Vantraax HKANT40K Air Ride SURELOK (Anti-Dock): Installed LOCKING PIN MECHANISM: Air-Assist Pin Puller or Quick Draw SUSPENSION SUB-FRAME: Hendrickson K-2 standard duty TYPE of SUSPENSION SPRING: Air Bag SPRING SPECIFICATION: Air Bag AXLE SUPPLIER: Hendrickson AXLE GENERAL SPECS: Axle-Tandem (2) Axles included in Slider (for 2S/1M or 2S/2M System) AXLE TRACK LENGTH: 77 ½” AXLE SPINDLE TYPE: Tapered Spindle BRAKE LINING SIZE: 16.5” x 7” BRAKE LINING SPECS: Hendrickson Extended Service (Abex-3030-197) BRAKE CONTROL SYSTEM: 2S/1M Wabco ABS SPRING BRAKE CONTROL: Sealco 110500 Spring brake priority BRAKE CONTROL HOSE & ETC.: Standard Air line & Hose Application (US&Canada) SLACK ADJUSTER SPECS: Gunite Auto 5.5” – 28-Spline BRAKE CHAMBER SPEC: MGM/Mirae 3030 Temper resist w/ standard stroke length (HT standard) STROKE LENGTH: MFG’s Standard stroke length HUB SPECIFICATION: HT Standard (KIC) 10-Stud Hub Piloted Outboard Iron Hub DRUM SPECIFICATION: HT Standard (KIC) Cast Drum HUB/DRUM-OPT (NUT & OTHER): Standard BEARING SPECIFICATIONS: General *LUBRICATION SPEC: Chev Delo (synthetic) Grease *WHEEL SEALS SPEC: Stemco Platinum Performance Discover Seals, Sentinel Hub Cap, Pro-Torq Nut. *HUBODOMETER: Stemco hubodometer, bracket mounted, reading in miles *HUBODOMETER LOCATION: Roadside (LH) front axle *TIRE INFLATION SPEC.: Hendrickson Tire Maxx Inflation System for undressed axle (this kit include Hendrickson Hub Cap for TireMaax) *TIRE INFLATION PRESSURE PRE SET: Pressure preset accordance w/Rim & Tire Assoc. recommendation ELECTRICAL HARNESS-GENERAL SPECS: Molded Color Code Phillips Harness with QCS Plug HARNESS-SPECIAL FEATURE: Manufacturer’s standard feature *FRONT LIGHT: (2) Trucklite 33275Y LED PC rated mounted w/grommet *REAR ID HEADER LIGHT: (5) Vision CL11120R3 LED PC Mounted with Grommet (Dual Function) *REAR ID SPECIAL FEATURE: Dual Function Rear Header Lights-3Lamps at center with Marker & Stop Functionality, 2 Lamps outboard with Marker & Turn Functionality REAR SIDE MARKER TYPE (SHAPE): Mini button style lamp *REAR SIDE MARKER DETAIL SPEC: (2) Trucklite 33275R LED PC rated flush w/ grommet 33725 w/ anti- theft hardware *REAR SIDE MARKER MT’G. LOCATION: Mounted on standard location on rear corner post – HT STD STOP/TURN/TAIL LIGHT QUANITY & TYPE: (4) Trucklite 40 or 44 Series (round type) or Equivalent *STOP/TURN/TAIL LIGHT DETAIL SPEC: (4) Trucklite 44322R LED (Super 44 Grey) Flange mounted w/stainless steel rivets. MAIN MID-TURN LIGHT: Install the mid turn lamp *MAIN MID-TURN LIGHT-DETAIL SPEC: (2) Trucklite 60272Y LED gray flange mounted with stainless steel rivets ABS LIGHT TYPE (SHAPE): Mini button style lamp *ABS LIGHT DETAIL SPEC: (1) Trucklite 33275Y LED PC rated w/grommet 33725 w/ anti-theft hardware ABS LIGHT MOUNTING LOCATION: Mounted on standard location on rear corner post – HT STD *LICENSE LIGHT: (1) Trucklite 33010C LED ELECTRICAL RELATED REGULATION: Standard Application MARKINGS & DECALS HT & PRODUCT TYPE DECAL PKG: Hyundai Logo & Product Type Decals Application DECAL PACKAGE: Factory furnished Hyundai Information & Regulatory Decal Package W/FMCSA, specified in notes. DECAL OPT 2-DECAL LOCATION: Standard Application DECAL OPT 3-DECAL INSTALLATION: Standard Application CONSPICUITY MARKINGS: Hyundai standard conspicuity w/logo applied to side bottom rail LICENSE PLATE: Temporary for delivery. Fasten on HDG mounting plate. LICENSE PLATE BRACKET INSTALL: Standard- Roadside below sill *REGISTRATION/MANIFEST BOX: (1) Factory choice – Trucklite 97960 or Phillips 16-802 REGISTRATION/MANIFEST LOCATION: Overlaid on Lower R/S Front PAINT/FINISH *UPPER COUPLER FINISH: Stainless steel-forward section w/Black Undercoating inside of Upper Coupler. *CROSSMEMBER FINISH: HDG: Slider (Bogie) crossmembers w/slider rail, Others-Prime & Black Undercoating *AXLE & COMPONENTS FINISH: Black Undercoating *SUSPENSION SUB-FRAME FINISH: Black Undercoating L/GEAR (K-BRACING) FINISH: Hot Dip Galvanized *L/GEAR (UPPER LEG) FINISH: Hot Dip Galvanized REAR FRAME FINISH: Hot Dip galvanized REAR FRAME-PAINT COLOR: None (for galvanized or stainless steel) REAR UNDERRIDE-FINISH & SPEC: Hot Dip Galvanized & Welded Horizontal Member REAR UNDERRIDE-PAINT COLOR: None (for galvanized or stainless steel) MISCELLANEOUS: MUDFLAP PROVIDER: Factory furnished Mudflaps MUDFLAP SPECIFICATION: 24” X 30” White Plain Plastic w/Hyundai Logo MUDFLAP MOUNTING: Mounted to rear of Slider Frame (Bogie) or standard location w/HD Washer Retainer. *Lift Pad Spec: (8) Temporary For Delivery Only. Wood Approx. 7/8” x 6-3/8” x 48” DISCLAIMER SPECIFICATIONS ARE BELIEVED TO BE CORRECT, BUT MAY CONTAIN ERRORS AND/OR OMISSIONS. PHOTOGRAPHS ARE REPRESENTATIVE OF THE SUBJECT EQUIPMENT, BUT MAY NOT BE IDENTICAL. EQUIPMENT AVAILABILITY, PRICES AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.